Prices listed below are for completed design files ready for milling:

When sending in models add:

  • $6 per coping

  • $12 per full contour

  • $12 per abutment

When sending in your wax-up add:

  • $6 per unit


Chameleon HT.jpg

Chameleon HT Zirconia

[1200 MPa / 45% translucency]

  • Copings:  $20

  • Full Contour:   $25

  • Design From a Model Scan or IOS: +$5/unit

  • Crown or coping with screw access hole: +$10

  • Finish Unit (Stain and Glaze):   +$10

One For All Zirconia

[1100 MPa / 47% translucency]

  • Copings:  $25

  • Full Contour:   $30

  • Design From a Model Scan or IOS: +$5/unit

  • Crown or coping with screw access hole: +$10

  • Finish Unit (Stain and Glaze):   $10

ML800_A1 with shade tab.jpg

Multilayer 800 Zirconia

[800 MPa / 49% translucency]

  • Full Contour:   $35

  • Design From a Model Scan or IOS: +$5/unit

  • Crown or coping with screw access hole: +$10

  • Finish Unit (Stain and Glaze):   $10

AT Zirconia

[750 MPa / 50% translucency]

  • Copings:  $25

  • Full Contour:   $30

  • Design From a Model Scan or IOS: +$5/unit

  • Crown or coping with screw access hole: +$10

  • Finish Unit (Stain and Glaze):   $10

*see indications for use

Custom Abutments

Implant black.png

Titanium Abutment:   $79

  • Hybrid Zirconia Abutment (with Ti base):   $99

  • *Flat Rate: Screw Retained Denture or Full Contour Hybrid Screw Retained Bridge - Includes pink tissue support and color for 9 or more units. Please specify Zirconia material. Pricing includes choice of Chameleon HT or One For All Zirconia, add $150 for ML800 Multi-Layer Zirconia

    • $399 from Pre-Designed File (parts, porcelain and cementation not included)

    • $599 from Wax-Up (parts, porcelain and cementation not included)

    • $799 from Model (parts, porcelain and cementation not included)

    • Stained/Glazed Finish $10 per crown

    • Stained/Glazed Finish $10 per unit of pink tissue (sorry, we don’t apply pink porcelain)

  • Full Contour Cement Retained Bridge billed per unit of material:

Titanium Bar: OEM (original equipment manufacturer) Screws, additional charge.

  • $799 from your design (no warranty)

  • $999 from Model Scan, TMC to design (no warranty)

  • $1099 from Model, TMC to scan, design and fit to model (warranty applies)

 Hybrid Trilor Bar: Parts, Screws and Cementation, addt’l charge. (OEM parts available per written request)

  • $975 from your design (no warranty)

  • $1175 from Model Scan, TMC to design (no warranty)

  • $1275 from Model, TMC to scan, design and fit to model (warranty applies)

Gold Color Anodizing:   $10

Resin-Bonded, Dual Cure, Prepare & Cement:   $15/unit

Additional Screw: $15

Surgical Screw (OEM): Additional charge based on manufacturer.

Ceramics

LiSi_pic.jpg

TMCilicate (blue block only)$35

TMCilicate (crystalized)$38

Calysta105837.jpg

Calysta Nano-ceramic MonoChrome LiTe:   $35

Calysta Nano-ceramic Multi-Layer:   $40)

 

Metal

CrCo.jpg

Tilite Chrome Copings or Full Contour (Sintered CoCr):   $23/unit

20180830_134316.jpg

CAD CAM Chrome Copings or Full Contour (solid milled CoCr):   $32/unit

PMMA / Wax

20180129_110503.jpg

PMMA Shaded or Clear:   $10

PMMA Shaded Multi-layer:   $13

Wax Coping or Full Contour:   $13

comes in:

  • Blue Polymer Reinforced

  • Diagnostic White

  • Crown & Bridge Green

3_blue_wax.jpg
single_diagnostic_puck_1.jpg
green_wax_pic.jpg
 

Miscellaneous

Pink Tissue Design & Support:   $15/unit

Rest Design:   $7.50/unit

Rest Design with Guide Plane:   $15/combination unit

Screenshot of design: $10 / per case

Design From a Model Scan or IOS: $5/unit

 

Questions? Contact us anytime:

Name *
Name